5

DVD43 4.6.0
on 04 August 2013, reviewed by: OscarE2

#66

After a long time since the question. First download the DVD43 Plug-In. It is for 64 bits, too. Click on the setup "exe" file, as administrator, alternative click... menu. And... Thats it!

name:

email:

comment:

Question: what is the second word?
In order to prevent spam answer the question

3

DVD43 4.6.0
on 29 August 2012, reviewed by: shiny

#65

It is much easier for DRM to be relatively impervious in 64-bit Windows. DVD43 came up with this stopgap method buy I believe DirectShow now operates as a kernel mode API and so video cannot be sampled off a DVD like original DVD43 did so well.

Anyhow, here's their link to the best effort: http://www.free-codecs.com/download_soft.php?d=5753&s=136&r= . This is DVD43 v1.0.0.5 and it's old. Make sure you are burning with "burnproof" and/or "simulate mode" on first, or just do a dry run before each title with a DVD-RW.

I have the Hunger Games (store bought) in my possession right now and it 5 2-hour "chapters" listed in the menu system. The copy protection is not getting easier!

My other suggestion is to use linux for this and other tasks. If you can get Linux Mint or Debian or Fedora to PLAY the actual content in VLC or mplayer, etc ... that means the stream (the demuxed mpeg2/VOBs are be written to display software in the clear.

That means that stream can be grabbed by anything: VLC, AcidRip, Lives, even Brasero. This is part of the reason why playing HDCP Blurays in most linux distros is difficult: the stream is not protected end-to-end.

Let me know if you have any more questions :)

name:

email:

comment:

Question: what is the second word?
In order to prevent spam answer the question

5

DVD43 4.6.0
on 08 June 2012, reviewed by: RON

#64

WORKS GREAT ON 32 BIT, BUT NOW MY WINDOWS 7 IS 64 BIT WANT WORK, DOES ANYONE KNOW WHAT I NEED FOR 64 BITS, HELP !

name:

email:

comment:

Question: what is the second word?
In order to prevent spam answer the question

5

DVD43 4.6.0
on 27 June 2011, reviewed by: Shirley

#63

I am having the same exact problem. I was so angry to find out that dvd43 will not work on my NEW 64 bit computer. What do we do now?

It says 32-bit. Its free. We cant complain. Buy DVD-Cloner.

on 25 Jul 2011, by Peter

name:

email:

comment:

Question: what is the second word?
In order to prevent spam answer the question

1 comment | Reply

2

DVD43 4.6.0
on 15 August 2010, reviewed by: chaton_494

#62

Exellent pour 32 bits mais impossible pour 64 bits ,ce n'est pas normal puisque les 64 bits seront bientot la norme !!!

name:

email:

comment:

Question: what is the second word?
In order to prevent spam answer the question

Reply

3

DVD43 4.6.0
on 28 June 2010, reviewed by: Peter

#61

Why does it say "Not compatibale with 64 bits windows edition"? I have windows Vista...what do I do?

name:

email:

comment:

Question: what is the second word?
In order to prevent spam answer the question

Reply

5

DVD43 4.6.0
on 11 March 2010, reviewed by: Deb

#60

I have used DVD43 for years along with DVD Copy Pro. It was prefect. Once I purchased my computer with Vista 64 bit, nothing works. I have tried anydvd,dvdfab, dvdsmith with no luck. Dvd43 was so easy to use, why don't the authors upgrade so it is 64 bit compatible. Does anyone have any suggestions as to what program to use that is not only 64 bit compatible but also works with DVD Copy Pro?

I am running Windows 7 64bit on a new lap top. Although I get a message everytime I boot up with DVD43 saying it wont work on a 64 bit machine, IT HAS WORKED SO FAR. I am thinking of changing the registry so the message will go away!!!! Then I would only get it when I actually load DVD43

on 16 Jan 2012, by Ray

name:

email:

comment:

Question: what is the second word?
In order to prevent spam answer the question

1 comment | Reply

5

DVD43 4.6.0
on 06 January 2010, reviewed by: chris

#59

been looking for a dvd software that I could backup a lot of my movies. found 1click dvd software and then down loaded dvd43 the latest version. had them both for about 3 months now and haven't had any problems so far. i have the 4.6 version which is the latest version . I'm running windows XP professional. try running your windows update and choose custom update. also perform a disk defragment on your computer.

name:

email:

comment:

Question: what is the second word?
In order to prevent spam answer the question

Reply

4

DVD43 4.4
on 12 May 2009, reviewed by: looi

#58

can i ask you all something ?
why the files that i download from the website can not burn to a DVD?
it show that it has incomplete files...........
what is it mean ?
what should i do?

name:

email:

comment:

Question: what is the second word?
In order to prevent spam answer the question

5

DVD43 4.4
on 01 May 2009, reviewed by: Silvio

#57

How do you work wir DVD43 with Vista(64). Is there another version?
Thank you
Silvio

name:

email:

comment:

Question: what is the second word?
In order to prevent spam answer the question

Reply

4

DVD43 4.4
on 25 April 2009, reviewed by: Skip Royeton

#56

I have DVD43 4.4.0.0, it does a beautiful job, except, I'm coming across more and more movies that 4.4.0.0 will not copy. Does anyone know how to get in touch with the programmer? Is a newer version coming out soon?

name:

email:

comment:

Question: what is the second word?
In order to prevent spam answer the question

Reply

2

DVD43 4.4
on 03 February 2009, reviewed by: soffpro

#55

my two dvd drives work perfectly

asus e616p3 and
Lite-on dvd-rw SOHW-1693S

THE LATTER WORKS FINE WITH OR WITHOUT dvd43 4.4

however, the ASUS (set to region two default) works fine without DVD43 but when i activate DVD43 4.4 it reads the wrong region - (region 2 as region 1, tested with region 1+2 discs)

it then freezes my computer and i have to right-click and wait a few minutes for the exit menu to appear before it will allow the disc to be released.

can you help please?

name:

email:

comment:

Question: what is the second word?
In order to prevent spam answer the question

3

DVD43 4.4
on 05 December 2008, reviewed by: Moleman

#54

I've just converted a dvd to mp4, so I can play it back on my ipod calssic, I used 1 CLICK DVD TO IPOD, and my OS is Vista 64 bit Home Premium, I was told it won't work, but I installed the latest version of DVD43 4.4, well I think it was, I sure this movie is DRM-COPYRIGHT protected, but will have to look futher into it, it was a purchased copy of Enter The Dragon, old Bruce Lee movie, I'm yet to try one from outside of my own dvd's, but will be trying it as soon as possible, the fact of the matter is, even the little smiley face on my task bar changed colour, so it was working, will post results of DVD COPY PRO when complete

name:

email:

comment:

Question: what is the second word?
In order to prevent spam answer the question

5

DVD43 4.31
on 09 November 2008, reviewed by: whitefishdontjump

#53

DVD43 runs okay with win xp sp3 and Nero 7 Ultra using a Memorex DVD+-R 510Lv1 16x drive.

Tips:
1) With Nero 7 Ultra & DVD 43, I found the best way to clone or copy the encrypted DVD is to use the image writer to copy entire DVD to a hard drive folder.

2) To avoid Errors when writing to a DVD or CD, before opening Nero or inserting bland media, first right click the DVD43 tray icon and 'Exit'.

3) I've created both a complete DVD on a DL 8.5GB disk and a main movie (no menus) on a standard 2 hour disk.

A nit: when I installed DVD43, the installer puts a shortcut on my desktop even though I told it NOT to do that during install dialog.

name:

email:

comment:

Question: what is the second word?
In order to prevent spam answer the question

4

DVD43 4.31
on 31 October 2008, reviewed by: torchwood101

#52

Also a lot of times if you are having trouble with your blank discs dont pitch them. When i first started backing up movie collection. which i do so my original copy stays in good shape (scratchless) and my kids can do whatever to the back up ones without pissing me off. lol
Anyway I had gotten 200 from online and was so pissed when they did not work, kept getting an error saying disc not in drive. Thankfully Ii never pitched them. I just recently went and got a new computer and gave my old one to the kids. Just cause I was curious I put those discs in that I bought three years ago and WOW, they work. So now I got 200 discs to use that I thought would never work,
So it may just be your reader on your burner that dont like a particular blank disc. Save the disc for when you get a new burner, or go and get a new one right away.

name:

email:

comment:

Question: what is the second word?
In order to prevent spam answer the question

4

DVD43 4.31
on 31 October 2008, reviewed by: torchwood101

#51

I was using an older version a few years ago and it worked well for long time. then I did start getting messages some kind of errors, been so long i dont really remember what they actually said. Usually the only times I had problems was when it got to the stage where I would have to put a blank disc in. Then after a year or so my red face icon would not go away. later my computer crashed and had to Fdisc it, was pissed, however it crashing had nothing to do with dvd43, at least not to my knowledge. I have tried many programs to run with it, but for me the best combo is dvd shrink, nero, and dvd43 (any version)

I have as far as I know the latest version now and still use it with dvd shrink and nero.

I posted earlier that i was getting a strange noise and my red face would not go away. Disregard my concern, my son realized that the disc had a tiny incomplete crack.

All in all I love the program. even if sometime rare times I dont get one of my movies backup.

name:

email:

comment:

Question: what is the second word?
In order to prevent spam answer the question

3

DVD43 4.31
on 06 October 2008, reviewed by: Earl

#50

Like others have experienced, DVD43 has not worked with the "disc copy" feature of Roxio Easy Media Creator 9. Instead, I ripped my source DVD with DVD Decrypter. After ripping, I took the assembled files and was able to burn a blank DVD using the "MyDVD9" feature of the Roxio program.

I see that Herman Street sells a DVD copy program that is supposed to be pretty good, but Herman Street itself got a bad rating on Epinions.com.

For $59.00, you can by 1 Click DVD Copy, but it doesn't have the decryption built-in, you have to use DVD43 - which can be problematic.

name:

email:

comment:

Question: what is the second word?
In order to prevent spam answer the question

5

DVD43 4.31
on 01 October 2008, reviewed by: Donna

#49

after reading the reviews of previous users- this had convinced me not to use this programe. Hope you have all managed to sort your errors out!

name:

email:

comment:

Question: what is the second word?
In order to prevent spam answer the question

5

DVD43 4.31
on 10 September 2008, reviewed by: mike

#48

I recently installed dvd43 and around the same time both of mycd/dvd drives stop reading media. In system driver review bothe devices are "operating properly" yet they will not read. I found one drive to be defective so I bought a new Sony DRU840. Now the 840 works fine as a master but when I connect the DRU510 as a slave the both lock up. I've tried all combinations of slave / master / cable select.

Is this a coincidance or can dvd43 by playing a part here?

Grasping at straws because both drives were working fine a few weeks ago.

Anybody?

name:

email:

comment:

Question: what is the second word?
In order to prevent spam answer the question

5

DVD43 4.31
on 06 September 2008, reviewed by: Richard

#47

I can't get dvd43 to work in window vista 64 is there a fix for this?

name:

email:

comment:

Question: what is the second word?
In order to prevent spam answer the question

Reply

2

DVD43 4.31
on 18 August 2008, reviewed by: Claus

#46

Since the installation of DVD43 a few days ago, I've had many problems burning several DVDs. The burning program (Nero 6) often stopped with a strange error message (something like "illegal command"), and sometimes even the whole system (WinXP SP3) was frozen completely (without any message).

I finally determined DVD43 as the cause for all these problems. After stopping this program, everything worked fine again.

name:

email:

comment:

Question: what is the second word?
In order to prevent spam answer the question

5

DVD43 4.31
on 09 July 2008, reviewed by: tim

#45

it was working great but now the cpu keep rebutting i had to deleate it threw safe mode . ? now

name:

email:

comment:

Question: what is the second word?
In order to prevent spam answer the question

4

DVD43 4.31
on 10 June 2008, reviewed by: Ron

#44

I have 1 click dvd copy pro and are using xp professional ed. I had dvd 3.7 was working well and than received update message from my copy pro that i was using outdated dvd 43 program. I went to dvd 43 webpage and downloaded new dvd 43.1 I also found that my dvd-r blanks were failing. I only use dvd+r rw and have had great success. I have burned disney, sony and almost all others. My sugesstion is to keep your burner program and dvd43 updated.

name:

email:

comment:

Question: what is the second word?
In order to prevent spam answer the question

4

DVD43 4.31
on 09 June 2008, reviewed by: tommy

#43

I have used this program for a few years with intervideo dvd copy express. it works good, but i have run into a few movies that it will not work with. if the movie in your dvd drive shows the drive letter way off to the right of the title, it will not be recognized in the drive and will not work. the following movies will not copy for example.

THE GREAT RAID (D:)
UNITED 93 (D:)

does anyone know a way around this??????

name:

email:

comment:

Question: what is the second word?
In order to prevent spam answer the question

5

DVD43 4.31
on 23 May 2008, reviewed by: John Johnson

#42

I have no problem with DVD43 3.9.0. I use 1Click DVD Copy 5.0.3.5. I have not gotten it to work with Roxio Easy CD and DVD Burning 9.0. I have been able to copy all DVD's. However, in most cases, I stop DVD43 before the record phase start. If I dont, sometimes it will not record properly.

I have downloaded DVD43 4.31 but have not yet installed it.

name:

email:

comment:

Question: what is the second word?
In order to prevent spam answer the question

Reply

3

DVD43 4.31
on 21 April 2008, reviewed by: Matthew

#41

I have used DVD43 for two years w/ few problems, but it has stopped working. I uninstalled it & downloaded 4.31, but it doesn't work at all.

Any advice?

name:

email:

comment:

Question: what is the second word?
In order to prevent spam answer the question

1

DVD43 4.31
on 15 April 2008, reviewed by: Vj

#40

I cannot remove the program from my computer. It is always open. Please help me through this process.

name:

email:

comment:

Question: what is the second word?
In order to prevent spam answer the question

3

DVD43 4.2
on 07 April 2008, reviewed by: boo

#39

i can't get it to work! i am using dvd shrink 3.2 and it won't encode it! any suggestions

name:

email:

comment:

Question: what is the second word?
In order to prevent spam answer the question

1

DVD43 4.0.0
on 30 December 2007, reviewed by: val

#38

smiley face turns green but we still cant get software approval to copy. Am using Roxio media creator 9.....any suggestions?

name:

email:

comment:

Question: what is the second word?
In order to prevent spam answer the question

5

DVD43 3.9.0
on 25 October 2007, reviewed by: EFR

#37

I am having problems with trying to copy a movie. It keeps saying there are bad sectors in track 5. I haven't had any problems with DVD43 before this time. I am using version 3.9.0 with Windows XP. I am using One Click DVD Copy PRO to copy with. Any suggestions? I have tried playing the movie on the computer and it works just fine. I have played it in the DVD player with no problems. Is there an update for DVD43?

Thanks

name:

email:

comment:

Question: what is the second word?
In order to prevent spam answer the question

5

DVD43 3.9.0
on 12 September 2007, reviewed by: tony

#36

carol what type of copy software are u running ? what windows system are u running ? i.e. 2000,xp ect... how many and what is the names of the drive models are u reading and writing with ? u may just need a software update for your drive or drives.

name:

email:

comment:

Question: what is the second word?
In order to prevent spam answer the question

5

DVD43 3.9.0
on 11 September 2007, reviewed by: carol lowney

#35

is there a update for 3.9.0. having trouble copying some movies some dont copy at all when played says disk error some have a lot of bad sectors

name:

email:

comment:

Question: what is the second word?
In order to prevent spam answer the question

5

DVD43 3.9.0
on 08 September 2007, reviewed by: tony

#34

i use 1click copy 5 download trial version and install first if you are not useing it already. when you ready 2 burn a copy of a movie it will prompt u 2 download dvd43. do a google on dvd43 download it and install. i use 3.9.0 version. 1click copy comes with a free version of copy to dvd if u buy 1click install it. u need 2 put in your blank dvd in writer first then the dvd u wan't 2 copy in your dvd rom drive. click start all programs and then vso then drivers it will open patin couffin drivers if the 2 drives u are will tell u media is in the drives. then open 1click set your write speed and u will have no more coasters. i use a external sony writer and have not had any problems at all. if 1click prompts u that it can copy the whole disk just say no. i use sony dvd+r disks there cheap and works on most all dvd players made. p.s on the if 1 of your drives that u are useing in the vso patin coffin drivers section just highlight click update driver. if u are useing a light on drive 4 writing u will have trouble. do a google and u will see what i mean. thats why i bought an external sony writer. if u have any other cd or dvd writing software such as nero etc.... uninstall first before doing any of the above. i am running windows xp home. i can't stress enough if u are useing a light on writer it or reader u will have conflicts with microsoft windows !!!!!!!!! gl 2 all

name:

email:

comment:

Question: what is the second word?
In order to prevent spam answer the question

3

DVD43 3.9.0
on 16 August 2007, reviewed by: Gary

#33

DVD43 3.9.0.0 doesn't work with Vista and DVD Copy 5.

Does anybody have a solution?

name:

email:

comment:

Question: what is the second word?
In order to prevent spam answer the question

5

DVD43 3.9.0
on 13 June 2007, reviewed by: Tracey

#32

my green face on dvd43 won't change back to yellow, l have uninstalled then installed know telling me i need a driver where do l get this and why has this happened, it worked yest, after reinstall my yellow face is grey

name:

email:

comment:

Question: what is the second word?
In order to prevent spam answer the question

5

DVD43 3.9.0
on 26 May 2007, reviewed by: garth

#31

this program is top nuts so update your old messsages and tell people to follow the instructions

name:

email:

comment:

Question: what is the second word?
In order to prevent spam answer the question

5

DVD43 3.9.0
on 09 March 2007, reviewed by: JJ

#30

When I insert a Region 2 DVD into my computer it takes DVD43 around 5 minutes before the devil face changes to the green smiley face. When I try to run the DVD in anything (Power DVD / Media Player / Interactual it says I have the wrong coding set and to change it?
Any advice???

name:

email:

comment:

Question: what is the second word?
In order to prevent spam answer the question

5

DVD43 3.9.0
on 09 March 2007, reviewed by: teresa

#29

Great Dvd43 3.9, however lately it says that I need a driver update. Help

name:

email:

comment:

Question: what is the second word?
In order to prevent spam answer the question

5

DVD43 3.9.0
on 05 March 2007, reviewed by: mike

#28

I upgraded my 1 click dvd pro and reinstalled my dvd43 because it was freezing up. Now all I get is a grey face and 1 click say's the dvd is encrypted and I must download Dvd43. What should I do... It worked fine before...
Thanks
Mike

name:

email:

comment:

Question: what is the second word?
In order to prevent spam answer the question

4

DVD43 3.9.0
on 05 October 2006, reviewed by: scott

#27

Hope this helps, With dvd43,3.9.0 it`s very tempermental, and conflicts with other program`s, I have both dvd43,3.9.0 and Region+cssfree and have found they conflict each other at times,so i use one or the other or both,No movie is fool proof, I`ve waisted alot of disc`s to get to this knowledge,i use sony dvd-r, or memorex dvd-r,because we don`t have a big selection here,I use one click dvd copy,If i have trouble i switch to nero7ultra,I`m having good luck with this method, 9 out of 10 work,So far i`ve found it`s just conflict`s between program`s,, I`m useing windows xp-home,with 1024mb ram, Hope this help`s, it did me, Keep going it`s worth it,, Special thank`s to program designer`s.

name:

email:

comment:

Question: what is the second word?
In order to prevent spam answer the question

WRITE A REVIEW:

1. All submitted reviews & comments will be subject to moderation before being displayed. Stay on the subject otherwise your review won't be published.
2. If you are looking for help or support, please use the forum.


Enter the code exactly as you see it - case sensitive - in the spam-prevention image above.
Reviews
  • Gom Player
  • You need to install CoreAAC-2.3.0.573 the latest audio codec for GOM player to...
  • Helium Audio Converter
  • muy bueno ya qe ademas de convertir en varios formatos limita el...
  • BluFab
  • While DVDFab is a great program for copying you can get better quality output for...
  • Adobe Flash Player
  • Crashes, does not work. Dreadful...

    Sponsored
    Affiliates

    Codecs.com is known also as Free-Codecs.com.

    All website graphics, design, logo and layout are Copyright © 2004-2014 Codecs.com